tower pop up banners
tower pop up banners
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display
Tower Pop Out Banners – 3-Sided Fabric Pop Up Display

Tower Pop Out Banners – 3-Sided Fabric Pop Up Display

€248,95
SKU: TOWER-POP Free Delivery

Step 1: Select frame Size

Choose Default Size

Need Custom Size?

Don't see your size?

Request Custom Size Quote

Our experts will get back to you within 2 hours

When is your event?

Help us prioritize your order

Shipping deadlines: Order today to secure delivery on November 27th

Step 2: Upload Artwork & Checkout

Upload your designs now or you can upload later

Upload Your Artwork

Upload your design file, share a link, or email it later.

Need Design Help?

Get a free 2D mockup preview of your design before ordering.

Request free 2D design preview

We'll send your mockup preview within 24 hours

€248,95

How to order your backdrop

01

Choose Product

Select your product, size, and add-ons that best match your needs.

02

Upload Design

Upload your artwork or request design assistance before placing your order.

03

Review Proof

Complete checkout, receive a proof, and approve the final artwork.

04

Print & Deliver

We print your approved order and ship it directly to your doorstep.

Product Specs

Tower Pop Out Banners – 3-Sided Fabric Pop Up Display

A tower pop out banner is a freestanding fabric column with three printed faces, held in shape by a sprung stainless steel frame rather than a pole and base. Each face is 1.01m wide and 2.01m or 2.21m high, so the branding reads the same whichever side a visitor approaches from. The frame is tensioned, so releasing it from the carry bag pops the banner out in seconds with no tools, and it folds flat again for the next event. Graphics are dye sublimation printed onto 260 gsm polyester that is wrinkle-resistant, fire-retardant and machine-washable, and ground pegs are supplied for outdoor use. Choose Medium for 2m stands and lower-ceilinged halls, or Large for entrances and open concourses where the extra height is visible over a crowd.

Key Features

  • Three printed faces, each 1.01m wide, so your branding reads from every approach angle
  • Spring stainless steel frame with Velcro reinforcement pops out in seconds, with no tools and no separate base
  • 100% polyester at 260 gsm: wrinkle-resistant, fire-retardant and machine-washable between events
  • Folds flat into a soft carry bag at 4.54kg packed (Medium) or 5.90kg (Large)
  • Ground pegs included for use outdoors
  • Dye sublimation CMYK printing from your own artwork, or free design assistance if you have none

Shipping & Installation

  • Domestic Shipping: Delivered in 5–7 business days across the UK
  • International Shipping: Available with customs-ready support
  • Pickup Services: Not available — all items are shipped
  • Installation: Optional professional setup available on request

Product Dimensions

Size Frame/Graphics Dimension Package Dimension Package Weight
Medium 1.01m wide x 2.01m height *3 sides 60.96cm x 60.96cm x 7.62cm 4.54kg
Large 1.01m wide x 2.21m height *3 sides 60.96cm x 60.96cm x 7.62cm 5.90kg

Product Specifications

  • Frame: Lightweight spring stainless steel with Velcro reinforcement
  • Fabric: 100% polyester (260 gsm), wrinkle-resistant, fire-retardant, and machine-washable
  • Print Method: Dye sublimation CMYK printing for vibrant and durable graphics
  • Assembly: Tool-free setup with a pop-up mechanism
  • Portability: Folds into a compact carry bag for easy transport

What's included

  • 1 x Tower pop out banner frame with printed three-sided fabric
  • Ground pegs
  • 1 x Soft carry bag for easy transport
  • Step-by-step assembly instructions

Artwork and file setup

We accept your artwork through WeTransfer, Dropbox, Google Drive, Email, or directly via the Upload Artwork button above. If you don't have a design ready, our in-house creative team is here to help—bringing your brand to life with a professionally designed layout tailored to this product.

To ensure you're confident before we print, we also offer a FREE 2D mockup preview. Use the "Request Free 2D Mockup Image" button at the top of the page and send us your content or files. We'll show you how your backdrop will look in real life.

Category Specification
Accepted Formats .eps, .png, .jpg, .bmp, .gif, .psd, .cdr, .pdf, .tif, .tiff, .ppt, .ai
Resolution 150 dpi at 100% of the final print size
Font Format No bleed, no crop marks, only outlined fonts
File If using Photoshop, please provide a flattened file only
File Size For uploading via the website, ensure the file size remains below 50 MB. If the file size exceeds 50 MB, kindly utilise file-sharing systems such as WeTransfer, Dropbox, Google Drive, etc., and share the URL with us.

Related Products

What is a tower pop out banner, and how does the three-sided frame work?

Pop out banners are fabric displays held open by a sprung frame sewn into the edge of the graphic. Most shapes in this family are flat and carry two printed sides. The tower is the three-sided one: three panels joined into a vertical column, so the display reads from every direction instead of only front and back.

The frame is lightweight spring stainless steel with Velcro reinforcement. It is held under tension inside the carry bag, so lifting it out lets it spring into shape on its own. There are no poles to thread, no base to weight and no tools involved. To pack down, the frame is folded back on itself until it lies flat and returns to the bag, which measures 60.96cm x 60.96cm x 7.62cm and weighs 4.54kg with the Medium graphic or 5.90kg with the Large.

The graphic itself is 100% polyester at 260 gsm, printed by dye sublimation so the ink is set into the fibre rather than sitting on the surface. That is why the fabric can be folded repeatedly without cracking, machine-washed between events and still meet fire-retardant requirements for indoor venues. Ground pegs are included for outdoor use.

Which size should you choose – Medium or Large?

Both sizes are 1.01m wide on each of the three faces, pack into the same carry bag and use the same frame and fabric. The only difference is graphic height, so the choice comes down to the ceiling you are working under and how far away you need to be seen from.

Choose the Medium at 2.01m high for shell scheme stands, exhibition halls with a rigged ceiling or truss overhead, retail floors and anywhere a 2m height limit applies. It is also the lighter of the two at 4.54kg packed, which matters if one person is carrying several.

Choose the Large at 2.21m high for entrances, registration areas, open concourses and outdoor events, where the extra 20cm lifts the top of the graphic above standing crowd height. Packed weight is 5.90kg.

Medium Large
Graphic size, each face 1.01m W x 2.01m H 1.01m W x 2.21m H
Printed faces 3 3
Packed size 60.96 x 60.96 x 7.62cm 60.96 x 60.96 x 7.62cm
Packed weight 4.54kg 5.90kg
Best for Shell scheme stands, retail floors, height-restricted halls Entrances, concourses, outdoor events

Tower pop out banner or roller banner? And how it compares to the flat pop out shapes

A roller banner and a tower pop out banner solve different problems. A roller banner is a single flat graphic pulled up out of a weighted cassette, which makes it ideal standing against the back wall of a stand where visitors only ever see it from the front. A tower has no base and no pole: the sprung frame holds all three faces open at once, which is what you want on an open floor, at an entrance or in the middle of a concourse where people arrive from any direction.

The practical trade-off is packing. A roller banner travels in a long bag roughly the width of its base, which has to be carried upright; the tower folds back on itself into a 60.96cm square soft bag under 8cm deep, which fits in a car boot flat or stacks with other kit.

Within the pop out family itself, the tower is the three-sided option. If you need the same sprung-frame convenience in a flat, two-sided format, the vertical pop up banner suits walkways and stand edges, while the horizontal pop up banner works as a pitch-side or finish-line board. The full range sits in custom pop up display banners.

Tower pop out banner Roller / retractable banner
Printed faces 3 1, or 2 on double-sided models
Structure Sprung steel frame, self-supporting Weighted cassette base with support pole
Setup Lift from the bag and it pops out, no tools Extend the pole and pull the graphic up
Packs into 60.96 x 60.96 x 7.62cm soft bag Long bag the width of the base
Best placed Open floor, entrances, approached from all sides Against a wall or stand back wall

Where they are used, and how to set your artwork up

Because the branding wraps all three faces, towers are usually placed where people circulate rather than where they queue: either side of a stand entrance, at registration, flanking a stage, at the turn of a concourse, or in pairs marking the start and finish of a route. On a retail floor they work at the end of an aisle; at sporting events and festivals the included ground pegs hold them against a breeze.

For artwork, each face has a print area of 1.01m wide by 2.01m high (Medium) or 2.21m high (Large). Supply files at 150 dpi at full size, with fonts outlined, no bleed and no crop marks, and flatten any Photoshop file before sending. A design template and assembly guide for this product is linked above the Product Specs section. If you want each of the three faces to carry different content, send your layout to the artwork team before ordering and they will check it against the template.

For larger fabric backdrops and exhibition branding, browse our printed media walls and backdrops collection.

Customer Reviews

Based on 105 reviews
70%
(73)
29%
(30)
2%
(2)
0%
(0)
0%
(0)
J
Jack Thompson
Super easy to transport

Packs into a compact nylon carry bag (around 60 × 60 × 8 cm), and still only ~4.5 kg—perfect for quick transport between venues.

C
Chloe Bennett
Excellent print quality on premium fabric

Fabric feels robust and vibrant. Print clarity from dye‑sublimation is superb and colours stay sharp even after multiple events. The material is machine‑washable and wrinkle‑resistant.

H
Harry Wilson
Impressive build and durability

The spring steel frame plus velcro keeps the structure firm even outdoors. Despite its height, it’s stable and easy to secure with the pegs provided.

L
Lucy Davies
Tall and attention‑grabbing presence

The tower design really stands out at our entrance area. Branding wraps all around, visible from multiple angles. Set‑up was tool‑free and quick.

E
Ed Shannon
Absolutely Worth the Price

It’s an investment that pays off in visibility and brand image. We’ve had it for months and it still looks pristine. Would buy again in a heartbeat.

Frequently Asked Questions

What is a tower pop out banner? +
It is a freestanding fabric column with three printed faces, held open by a sprung stainless steel frame sewn into the graphic rather than by a pole and weighted base. Each face measures 1.01m wide, so branding reads the same from whichever direction someone approaches. The tower is the three-sided member of the pop out banner family; the other shapes in that range are flat and carry two sides.
How is it set up and folded away? +
Setup is tool-free and takes seconds: the frame is held under tension in the carry bag, so lifting it out lets it spring into shape on its own. To pack down, the frame is folded back on itself until it lies flat and goes back in the bag. Step-by-step assembly instructions are included in the box, and a design template and assembly guide is linked on this page.
How is this different from a roller banner? +
A roller banner is one flat graphic pulled up from a weighted cassette, which suits standing against a wall or the back of a stand where it is only seen from the front. A tower pop out banner has three printed faces and no base or pole, so it works on open floor, at entrances and anywhere people arrive from several directions. It also packs differently: a 60.96cm square soft bag under 8cm deep, rather than a long bag the width of a cassette base.
Can a tower pop out banner be used outdoors? +
Yes. Ground pegs are supplied with every unit to secure it, and the 260 gsm polyester is weather-resistant, which is why these are a common sight at sporting events, festivals and outdoor retail activations. As with any lightweight freestanding display, peg it down whenever it is used outside.
Which size should I choose? +
Both sizes are 1.01m wide on each face and use the same frame, fabric and carry bag; only the height differs. Medium (listed as 1m W x 2m H) gives a graphic 2.01m high and weighs 4.54kg packed, which suits shell scheme stands, retail floors and halls with a height restriction. Large (listed as 1m W x 2.3m H) gives a graphic 2.21m high and weighs 5.90kg packed, which suits entrances, concourses and outdoor events where the extra height clears a standing crowd.
How is it transported and stored? +
It folds flat into the soft carry bag included with the unit, measuring 60.96cm x 60.96cm x 7.62cm. Packed weight is 4.54kg for the Medium and 5.90kg for the Large, so one person can carry it, and the flat shape stacks or lies in a car boot rather than needing to travel upright. No cases or specialised equipment are required.
How long does UK delivery take? +
Delivery across the UK takes 5 to 7 business days once production is complete. Production begins only after your artwork has been approved, so work back from your event date when ordering and allow time for proofing.
Is international shipping available? +
Yes. International shipping is available and includes customs-ready support to assist with cross-border delivery requirements.
Can I pick up my order instead of having it shipped? +
Pickup services are not available for this display. All orders are fulfilled through shipping only.
Is professional installation available? +
Optional professional setup is available on request. Buyers who require on-site installation assistance should confirm this at the time of ordering.
Can each of the three sides carry different artwork? +
The graphic is fully custom, printed by dye sublimation CMYK onto the polyester so the colour is set into the fibre rather than laid on top. Each face has its own print area of 1.01m x 2.01m (Medium) or 1.01m x 2.21m (Large). A design template and assembly guide is linked on this page; if you want the three faces to differ, send your layout to the artwork team before ordering and they will check it against that template.
What are the frame and fabric made from? +
The frame is lightweight spring stainless steel with Velcro reinforcement, which is what holds the three faces under tension and lets the banner pop out without tools. The graphic is 100% polyester at 260 gsm: wrinkle-resistant, fire-retardant and machine-washable, so it can be cleaned and reused across repeated events rather than reprinted each time.
What comes in the box? +
One tower pop out banner frame with the printed three-sided fabric, ground pegs, a soft carry bag and step-by-step assembly instructions. There is nothing further to buy to use it: no base, pole or tools are required.